Hydrogen Sulfide Scavenger 210 Ltr

Product Name

RXSOL-11-5014-210

Product Type

Hydrogen Sulfide Scavenger

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone

+91 22 65113333 / 5555 / 9999 / 27611360

Fax

+91 22 2781 1318 :::AOH :0091 9821214367

Email

mail@rxmarine.com.

HS Code : 3811900

                         Chemical Name

       CAS-No

                     Weight %

Hexahydro – 1, 3, 5 – tris (2 – hydroxyethyl)-S-triazine

    4719 – 04 – 4

                       30 – 40

MEA, Mono Ethanol Amine

     141-43-5

                        20 – 30 

Methyl Alcohol 

      67-56-1

5 – 10

N-MITHYLDIETHANOLAMINE 

MDEA-2-2-METHYLDIETHANOL 
N-METHYLDIETHANOL ,
N,N BIS 2 -HYDROXYETHYL METHYLAMINE

Blending Mixture

10-20

Other Ingredient which not classified as dangerous

NA

                        10 – 40

Odor

Specific

Appearance

 Liquid, Clear , Slightly Hazy, Colorless , Slight  pale yellow

Contact with eyes

Irritating to eyes

Contact with skin

 May cause irritation. May cause sensitization by skin contact.

Inhalation

High airborne concentrations of mist or spray may cause irritation or damage to the upper respiratory tract.

Ingestion

Harmful if swallowed

Aggravated Medical Conditions

Skin disorders. Preexisting eye disorders. Respiratory disorders

Environmental Hazard

NA.

General Advice

 Get medical attention immediately if symptoms occur.

Eye Contact

Rinse immediately with plenty Amount of water, also under the eyelids, for at least 15 minutes. Seek immediate medical attention.

Skin Contact

Wash off immediately with soap and plenty of water removing all contaminated clothes and shoes. Seek immediate medical attention.

Inhalation

Move to fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration. Seek immediate medical attention.

Ingestion

Never give anything by mouth to an unconscious person. Do NOT induce vomiting. Rinse mouth. Get medical attention.

Notes to Physician

Treat symptomatically.

Flammable Properties

Not flammable

Flash Point

>93.3 oC / >200 oF

Suitable Extinguishing Media

Water spray. Foam. Dry powder. Carbon dioxide (CO2).

Unsuitable Extinguishing Media

Do not use a solid water stream as it may scatter and spread fire.

Hazardous Combustion Products

Carbon oxides, Nitrogen oxides (NOx), Phosphorus oxides

Explosion Data

Sensitivity to Mechanical Impact

Not sensitive

Sensitivity to Static Discharge

Not sensitive

Protective Equipment and Precautions for Firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.

Personal Precautions

Use personal protective equipment. Avoid contact with skin, eyes and clothing. Ensure adequate ventilation.

Methods for Containment

Dike far ahead of liquid spill for later disposal. Prevent further leakage or spillage if safe to do so.

Methods for Cleaning Up

Soak up with inert absorbent material. Pick up and transfer to properly labeled containers.

Handling

Wear personal protective equipment. Avoid contact with skin, eyes and clothing. Ensure adequate ventilation.

Storage

Keep containers tightly closed in a cool, well-ventilated place. Storage temp : –       5-40oC

Exposure Guidelines This product does not contain any hazardous materials with occupational exposure limits established by the region-specific regulatory bodies

Engineering Measures:       Ensure adequate ventilation, especially in confined areas.

Eye/Face Protection:           Safety glasses with side-shields. If splashes are likely to occur, wear:. Goggles. Faceshield.

Skin and Body Protection:  Wear protective gloves/clothing.

Respiratory Protection:    If exposure limits are exceeded or irritation is experienced, NIOSH/MSHA approved respiratory protection should be worn. Positive-pressure supplied air respirators may be required for high airborne contaminant concentrations. Respiratory protection must be provided in accordance with current local regulations.

Hygiene Measures:    Remove and wash contaminated clothing before re-use. Wash hands before breaks and immediately after handling the product.

Odor

Specific Amine

 Appearance

Liquid,Clear to Slightly Hazy Colorless

pH

9 – 12

Boiling Point

No Data

Health Hazard Vapor Pressure

NA

Vapor Density

NA

Vapor Pressure

NA

Flammability

Not Flamable

Autoignition Temperature

200 oC / 392 oF

Flammability

Not Flamable

Flammability Limits in Air

No data available

Explosion Limits

No data available

Specific Gravity

1.08 – 1.09

Solubility

Complete Soluble in water

Stability

Stable under recommended storage conditions.

Incompatible Products

Strong oxidizing agents. Strong bases.

Conditions to Avoid

Excessive heat

Hazardous Decomposition Products

Carbon oxides. Nitrogen oxides (NOx). 

Hazardous Polymerization

None under normal processing.

Product Information: The product itself has not been tested.
Irritation:       May cause skin and eye irritation. May cause irritation of respiratory tract.

LD50 Oral :       >500 – 2000 mg / kg (rat)

LD50 Dermal :  > 2000 mg / kg (rat)

Component Information

Chemical Name

LD50 Oral

LD50 Dermal

LC50 Inhalation

Hexahydro – 1,3,5 – tris (2 – hydroxyethyl)- S- triazine

763 mg / kg (Rat)

Chronic Toxicity
Chronic Toxicity Prolonged exposure may cause chronic effects.
Carcinogenicity Contains no ingredient listed as a carcinogen.
Sensitization May cause sensitization by skin contact.

Target Organ Effects Respiratory system,  Eyes, Skin, 

Ecotoxicity
May be harmful to aquatic organisms.

 Toxicity to Fish                                             LC50 (Brachydanio rerio) : 10 – 100 mg / L 96 hr
  Microtox                                                       EC20 (0.5 h) : > 100 mg / L (Microoganism / Effect on activated sludge)
 Daphnia Magna (Water Flea)                    EC50 : 10 – 100 mg / L 48 hr (aquatic invertebrate)

Persistence and Degradability                 Readily biodegradable.

Waste Disposal Method:           Dispose of in accordance with local regulations.

  Not classified as hazardous for transport

International Inventories

Component

TSCA

DSL

EINECS

ENCS

INCSC

KEC

Hexahydro – 1,3,5 – tris (2 – hydroxyethyl)- S- triazine

Present

X

X

5 – 998; 5 – 1080

X

KE – 33998

The information provided about the product on this  Safety  Data  Sheet has been compiled from knowledge of the individual constituents. The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product.In terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications  – usage in such may cause risks not mentioned in this sheet.  Do not use for other application (s) without seeking advice from the manufacturer.
 

Hydrogen Sulfide Scavenger -RXSOL-11-5014-210 
HS Code : 3811900

H2S Scavengers and Speaciality Chemicals to Reduce Hydrogen Sulfide Exposure

Rx Marine International  offers a compleate line of water soluble and oil soluble hydrogen sulfide scavengers that can be applied via continous injection or through batch treatments.

Benefits:

Improved safety due to reduced H2S content

Meet contract sales limit for H2S content

Removal of hydrogen sulfide gas from process systems, therefore reducing corrosion

The reaction products can be easily removed from the process systems

Maintains asset integrity and reduces the need for new equipment

Hydrogen sulfide (H2S) naturally occurs and may already by present informations can be the result of sulphate reduicing bacteria (SRB) in your process systems. Ones established, it can potantially be carried in hydrocarbon streams, resulting in servere gatharing lines, creating high failure rates in your production.

Through stratgic H2S scavenger applications and speaciality chemicals, Rx Marine International chemicals experts can help reduce H2S levels and lower overall solids in your system, reducing any gas or fluid souring while controlling corrosion.

If  you  encounter hydrogen sulfide in your system, Rx Marine International can perform a fluid compatibility test to determine H2S levels and customize a chemical solution to fit your production meeds.