Name: Slip Coat RXSOL HOLD BLOCK 50 Ltr
SKU: RXSOL-22-2210-050

Descriptions
location
Request Quote
Additional Information
Tags
Reviews (0)
Custom Tab

EMULSION BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results.

Slip Coat RXSOL HOLD BLOCK is a Heavy Duty protective Solution for hold of vessels which carrying corrosive and / or messy cargos such as Sulphur, Salt, Petcoke, coal and concentrates. It can be easily removed after discharging of cargo .
FEATURES AND BENEFITS:……………………………..
$ Protects metal against corrosive cargo.
$Safe on all coatings, and to the personnel handling it.
$ Protects paint against cargo penetration.
$ Environmentally friendly .
$ Safe to use in occupied / covered areas.
$ Reduces turn around times .
$ Easy to Direct Spray.

Application:

Rxsol hold block is a Heavy Duty protective Solution for hold of vessels, which carrying corrosive and / or messy cargos such as sulphur salt petcock coal and concentrates. It can be easily removed with it

Recommendation Dose for smooth surface :
for Sulphur, Salt, etc 100 Ltrs/Hold for HANDYMAX & 150 Ltrs/Hold for PANAMAX
& for Petcoke, Coal, etc 200 Ltrs/Hold for HANDYMAX & 250 Ltrs/Hold for PANAMAX

This materials can be use directly with low pressure machine or manually by garden spray pump. in general practice on smooth & clean surface each drums of 210 ltrs covers 2000 to 2500 sq meter while on rough and rusted surface require more quantities of materials.

Dose:

for HANDYMAX (5 Holds) : In general 500 Ltr to 1000 Ltr RXSOL-22-2210-210 require to cover area up to 12 mtrs , i.e approx 1/2 drum to 1 drum of material is sufficient for each hold , while
for PANAMAX (7 Holds) : In general 1000 Ltr to 2000 Ltrs RXSOL-22-2210-210 require to cover full area. , i.e approx 3/4 drum to 1.25 drums of material is sufficient for each hold.

Note:

This Emulsion is safe to use , But as a precaution goggles & Protective gloves with mask require before use of this materials.

Precaution : 1 > Deposition of previous cargo / Lime wash should be removed .
2 > Newly Painted surface should be fully cured.

Other Valuable Hold Cleaners :::

Cement Remover RX Hold ::: Highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement. RXSOL’S R & D has developed this molecular cement dissolver. Part No.- RXSOL-22-2202-025, Part No.- RXSOL-22-2202-020, Part No.- RXSOL-22-2202-050

Part No.- RXSOL-22-2202-035, Part No.- RXSOL-22-2202-210

Slip Coat RXSOL HOLD BLOCK ::: Polymer EMULSION BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results. Part No.- RXSOL-22-2210-210, Part No.- RXSOL-22-2210-025, Part No.- RXSOL-22-2210-050

BARRIER HOLD COAT ::: Highly effective ecofriendly Product blending of natural ingredients which is provide thin temprory film on Hold Surface to protect corrosion. This is making barrier between corrosive cargo like Sulphur, Salt, Petcoak, Cement etc and Hold surface. Part No.- RXSOL-22-2211-210

COAL REMOVER rx hold ::: A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2215-210, Part No.- RXSOL-22-2201-025, Part No.- RXSOL-22-2201-050

Hold Wash Concentrate RX ::: RXSOL hold wash is a versatile all purpose marine cleaning solution it can be used as a powerful stand alone cleaner for Petroleum oily stains and residues, vegetable and animal fats, as well as dirt, proteins, soils, coal, ore, coke or in combination. Part No.- RXSOL-22-2204-210, Part No.- RXSOL-22-2204-025, Part No.- RXSOL-22-2204-050

Rock Phosphate Cleaner rx hold ::: A powerful penetrating mixed chemical products to remove heavy Rock Phospate deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems. Part No.- RXSOL-22-2201-210

PCS Hold Clean ::: RXSOL PCS is an innovative, concentrated liquid product specifically engineered to attack, penetrate and remove Coal Carbon, pet coke, lime deposition accumulations from cargo and storage tanks, Also Developed for cargo hold cleaning to remove stains. Part No.- RXSOL-22-2208-210

HBI CARGO Hold Wash Concentrate RX::: RX HBI CARGO Hold Wash Concentrate RX is a versatile all-purpose QUALITY marine cleaning solution. It can be used as a powerful stand-alone cleaner for HBI CARGO . it can be used as a powerful stand alone cleaner for HBI CARGO dust and deposition. Part No.- RXSOL-22-2216-210, Part No.- RXSOL-22-2216-025

Additional information

MSDS

Product name

RXSOL-22-2210-210

Product type

Slip Coat RXSOL HOLD BLOCK Resist

Company Details
RX MARINE INTERNATIONAL
105 , A-wing, BSEL TECH PARK
VASHI , NEW BOMBAY 400705
INDIA

Phone

+91 22 65113333 / 5555 / 9999 / 27611360

Fax

+91 22 2781 1318 :::AOH :0091 9821214367

mail@rxmarine.com

Chemical Name

Concentration by Percentage

Polyvinyl alcohol

5-10

Contains Emulsified POLYMER

<15

Non classified ingredients

70 – 75

Odour

Odourless

Appearance

Liquid, clear

Contact with eyes

Can cause damage to the eyes

Contact with skin

Can cause damage to the skin

Inhalation

Vapours or aerosols may cause irritation of eyes, nose and respiratory tract

Ingestion

The ingestion of significant quantities may cause damage to stomach lining

Environmental Hazards

None

Human Health Hazards

Moderates

R 35:Causes skin burning effects

General

In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45)

Inhalation

Harmful,. supply or remove to fresh air and seek medical advice attention

Skin Contact

May cause irritation Rinse with running water and soap. Skin care. Remove contaminated clothes. Remove contaminated clothing immediately and drench affected skin with plenty of water. Then wash with soap and water Seek medical advice if necessary Contaminated clothing should be laundered before reuse

Eye Contact

If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes ( Flush with running water for at least 15 minutes Immediately . ) Obtain immediate medical attentionContinue flushing with water until medical help arrives

Ingestion

Vomiting is dangerous , seek medical attention. ( Do not induce vomiting ) Never give anything by mouth to an unconscious person Give plenty of water to drink Obtain immediate medical attention

Non combustible Decomposition products may include toxic and irritant fumes Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions

Suitable

N.A. can use foam dry Co2 , water-spray.

Not suitable

Not applicable

Special

Not applicable

Protection of fire Fighter

Not applicable

Flashpoint

> 250º C

Special protective equipment for fire-fighters

Wear protective equipment.

Personal Precautions

Wear protective clothing as per section 8

Environmental Precautions

Do not allow to enter public sewers and watercourses

Immediate Actions

Contain spillage by any means possible

Clean Up Actions

Absorb spillage in inert material and shovel up Ventilate the area and wash spill site after material pick-up is complete

Special Precautions

Wear protective clothing as per section 8

Enviromental Precaution

Direct flow into drainage system, surface or ground water is prohibited.

Cleaning Method

Flush Spill Area with Water andremove with liquid-absorbing material like foam sand,sawdust etc..

Handling

The usual precautions for handling chemicals should be observed See Section 8 Eyewash bottles should be available.

Storage

Keep only in the original container in a cool, well ventilated place (S3/9/49) Protect from frost.

Condition to Avoid

Non flammable but avoid direct heating

Materials to Avoid

Do not subject to Acidic / Oxidizing Agents.

Handling

Keep Container Tightly Closed

NOTE : Eyewash facilities require atworkplace The product causes corrosion on skin and mucous membranes Pl. Note that In case of discharge of acidic or alkaline products into the sewerage system the pH must be in the range of 6-10 since higher or lower pH values may damage the sewerage system or impair biological dosage treatment plants. So that for maintaining pH we have to add acidic / basic medium neutaliser . For example if pH is less than 6 basic neutraliser is required and if pH is more than 10 acidic nature neutraliser is required. For details of any guideline pl. Visit our technical website http://www.rxmarine.com

Dilute in water (always use plastic jar and RXSOL should be added to water never add water to RXSOL.)

Exposure Limits

There are no recommended or established controls for this product

Exposure controls

No special ventilation is required unless the product is used in a spray form

Occupational exposure controls

Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended) During fumigation/spraying wear suitable respiratory equipment (S42)

Personal protection

Respiratory System Protection

Approved respirator must be worn when spraying

Eye Protection

wear eye protection (on possibility of contact )

Hand protection

wear PVC chemical resistance protective glove

PRODUCT PROPERTIES:

Appearance

White liquid emulsion

Density

In g/cm3 at 20°C: 1.01

Compatibility

Metal

No known effect

Rubber

No known effect

pH
Flash point

Alkaline ( 7 to 8 ) .
Not Applicable

Solubility

100% soluble in water

Packaging

210 Size (in Litres)

–  Stable
–  Avoid overheating, Keep away from frost
– See Section 5
– Hazardous Decomposition Products:
   Do not occur if stored and used as directed. In FIRE combustion CO, CO2 , NH3, SOXetc hazardous gas produced.
NOTE : AVOID CONTACT WITH ACID

Toxicological information

No experimental data available.

Inhalation

Vapours or aerosols may cause irritation of eyes, nose and respiratory tract.

Contact with skin

Prolonged skin or eye contact may cause chemical burns.

Contact with eyes

Prolonged skin or eye contact may cause chemical burns.

Ingestion

The ingestion of significant quantities may cause burning sensation.

Carcinogenicity

No evidence of carcinogenic effects.

Inhalation

Vapours or aerosols may cause irritation of eyes, nose and respiratory tract.

LD50 (oral)

> 2000 mg/kg – (Polyvinyl alcohol, partly saponified).

No components of this material are toxic to aquatic organisms, product are readily biodegradableas per by international regulation . This material must be disposed with local national regulations. Aquatic Toxicity.

Classification

This material and/or its container must be disposed of as hazardous waste EU Waste class: 06 02.

Disposal considerations

Do not discharge into drains or the environment, dispose to an authorised waste collection point. Disposal should be in accordance with local, state or national legislation.

As per guide line of local rules and regulation and before disposal and neutralization pl. refer 07 article.

Transport over land ADR/RID : Not classified as hazardous for transport

– In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible)

Classification and labelling

Not classified as hazardous for users- S2 : Keep out of reach of children S26 : Incase of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28 : After contact with skin, wash immediately with plenty of water. S37/39 : Wear suitable gloves and eye/face protection.

This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is intended to describe our products from the point of view of safety requirements and is not intended to guarantee any particular properties Text of R and S phrase codes used in this safety data sheet:-

R34

Causes burns;

R37

Irritating to respiratory system.

The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper applic- ation(s). The product is not sold as suitable for other applications – usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer