TankClean EcoSolve
Heavy duty cleaner for removal and hydrocarbon free cleaning of heavy mineral hydrocarbon deposits. Very effective cleaner for sticky Oily and Greasy mess, Fully active cleaner specially formulated for the removal of tuff oily stains residues,
RXSOL ECO-SOLVE
Heavy-Duty Ecological Cleaner for Hydrocarbon Deposits & Hydrocarbon-Free Tank Cleaning
Product Category: Marine Tank Cleaning Chemical
Application: Cargo Tanks, Fuel Tanks, Hydrocarbon Residues & Heavy Mineral Deposits
Form: Liquid Concentrate
Brand: RXSOL – DUBICHEM Marine International
Product Description
RXSOL ECO-SOLVE is a high-performance, environmentally conscious heavy-duty marine cleaning chemical designed for the removal of heavy mineral hydrocarbon deposits, oily residues, grease and persistent hydrocarbon contamination from cargo tanks and associated marine surfaces.
The product is formulated for demanding tank-cleaning operations where conventional general-purpose cleaners may not provide sufficient cleaning power. It is particularly useful when the objective is to achieve a deep, effective and hydrocarbon-free tank surface suitable for subsequent cargo loading.
Very effective cleaner for sticky PU, Gasious,Oily and Greasy mess, Fully active cleaner specially formulated for the removal of tuff oily stains residues, with out the need for Scrubbing or Brushing which can cause mechanical damages to surface and result in poor performance. Field test have shown that this is very gentle with personnel and on metallic colour surface. Should always be used at full strength to obtain maximum benefits.
Same Family PRODUCT ::: www.rxmarine.com/STICKNSOL ( STICK N SOL , RXSOL-15-1017-025 )
This heavy duty cleaner is a biodegradable degreaser (oil dispersant). It disperse and remove all types of oil, grease, wax, and stains, leaving the treated surface cleansed and back to original condition without any short or long term effects. And This cleaner is powerfull substitute of IPA, Methyl Ethyl Ketone , acetone, and other hazardous alcohol and solvents. This product have low evaporation rate and high solvency formula can significantly reduce overall solvent usage. It contains no water and it is 100% reactive proprietory blend.
Hydrocarbon-Free Tank Cleaning
One of the important applications of RXSOL ECO-SOLVE is preparation of tanks where subsequent cargo requirements demand a high level of cleanliness and minimal hydrocarbon carryover.
The product can form part of a planned tank-cleaning sequence involving pre-cleaning, chemical washing, rinsing and final inspection. The exact cleaning procedure should be selected according to the previous cargo, tank coating, contamination level and next-cargo requirements.
Cleaning Performance
RXSOL ECO-SOLVE is intended for difficult contamination where heavy mineral hydrocarbons have adhered to tank surfaces and ordinary washing is insufficient.
Its cleaning action helps loosen and remove:
-
Mineral oil residues
-
Heavy hydrocarbon films
-
Oily deposits
-
Grease
-
Persistent tank contamination
-
Hydrocarbon-based cargo residues
Application Method
The product may be applied using suitable tank-cleaning machines, spray equipment, circulation systems, brushing or manual application, depending on the cleaning operation and tank configuration.
General Procedure
-
Remove loose cargo residues where practical.
-
Pre-rinse the tank with suitable water.
-
Prepare the cleaning solution according to contamination level and operational requirements.
-
Apply through the appropriate tank-cleaning equipment.
-
Allow adequate chemical contact time.
-
Agitate or mechanically wash the contaminated surfaces where necessary.
-
Drain the cleaning solution.
-
Rinse thoroughly with clean water.
-
Inspect the tank and repeat the cleaning process if required.
-
Conduct wall-wash or other cleanliness testing where specified by the charterer, cargo requirement or vessel's tank-cleaning procedure.
Note: Dilution ratio, temperature and contact time should be selected according to the specific cargo residue and tank-cleaning requirement. Always refer to the latest RXSOL Technical Data Sheet before application.
Cleans, degreases and disperse heavy grease and oil build up on surfaces and hard to reach areas. Great for engines overhauling, heavy machinery, industrial equipment maintenance and mechanical parts cleaning.
Depends on usage this product is designed into two types :::
- RXSOL-20-2019-025 Concentrate Heavy duty industrial cleaning job - not suitable for painted or coated surfaces.
- RXSOL-20-2019-025 Tech Medium duty industrial cleaning job - suitable for all surfaces.
Suitable for fast and effective cleaning jobs on huge areas with very minimal scrubbing activity and instant residue removal.
Widely applicable at airports and hangars for its non-volatile, non-corrosive and bio-degradable.
Easy and safe to use for electrical and electronic small sensitive components with hard to reach area. Solutions are non-hazardous and non-abrasive
Machine maintenance and overhauling, tools restoration.
Key Features
-
Heavy-duty marine tank cleaner
-
Designed for difficult mineral-hydrocarbon deposits
-
Effective against oily and greasy residues
-
Supports hydrocarbon-free tank cleaning
-
Suitable for cargo-tank cleaning operations
-
Useful for heavy contamination and persistent residues
-
Designed for professional marine cleaning applications
-
Environmentally conscious formulation
-
Suitable for use in planned tank-cleaning procedures
- Cleans and flushes paint spray guns, paint lines, mixing tanks, and general purpose paint jobs
- Removes graffiti from smooth and rough surfaces
- Removes and cleans wax for surface preparation for paint, glue, and assembly applications
- Removes vinyl graphics from boats, signs, trucks, and glass
- Cleans and degreases a variety of parts, tools, and equipment
- Removes soot, grease, oil, grime, and diesel fuel
- Handles tough automotive and transportation cleaning jobs
- Cleans and removes adhesive caulking and bedding compounds
- Cleans glue residues, resin, and hardener
- Cleans toner, copier equipment, and machinery including printing presses
- Removes tar and sap
- Flushes and cleans polyesters, vinyl ester, and epoxy lines
- Removes polyurethanes, varnishes, enamels, and UV curable coatings
- Cleans and prepares material surfaces such as metals
Yes. I found the official/public technical data sheet information for Careclean Eco-Solve. There are two public versions, and the later revision gives a dosage range of 0.5–2% for recirculation, while an earlier PDS gives 1–3% for DPP→CPP cleaning and 0.3–1% for hydrocarbon-free cleaning after mineral oil.
For an RXSOL product page, I recommend using the technical specifications below as a target/comparable specification only, unless your own RXSOL QC/COA confirms these values.
RXSOL ECO-SOLVE
Heavy-Duty Hydrocarbon & Cargo Tank Cleaner
Technical Specifications
| Property | Typical Specification |
|---|---|
| Product Name | RXSOL ECO-SOLVE |
| Product Type | Heavy-Duty Marine Tank Cleaner |
| Physical State | Liquid |
| Appearance | Clear to slightly coloured liquid* |
| Density | Approx. 1.00 kg/L |
| pH | Approx. 7.0 at 5% dilution in fresh water |
| Flash Point | >62°C |
| Water Solubility | Dispersible / emulsifiable in water |
| Cleaning Action | Emulsifying / hydrocarbon residue removal |
| Application | Cargo tanks, hydrocarbon tanks, heat exchangers and industrial systems |
| Recommended Water | Fresh water or seawater, subject to application procedure |
| Recommended Application | Recirculation / tank-cleaning system |
| DPP → CPP Cleaning | Typically 1–3% solution* |
| HC-Free Cleaning after Mineral Oil | Typically 0.3–1% solution* |
| General Recirculation | 0.5–2% solution* |
| Operating Temperature | Approx. 60°C for demanding tank-cleaning applications* |
| Typical Cleaning Time | Approx. 2–4 hours, depending on contamination* |
| Marine Pollutant Classification | Not classified as marine pollutant according to referenced product information* |
| IMO Status | Comparable source product stated as IMO approved under MEPC.590* |
*Actual RXSOL values must be confirmed by the applicable RXSOL Technical Data Sheet, batch specification and approval documentation.
Cleaning Performance
RXSOL ECO-SOLVE is designed for difficult mineral-hydrocarbon contamination, including residues associated with:
-
Crude and mineral oils
-
Coal tar
-
Benzene-containing residues
-
Lubricating oils
-
Petroleum distillates
-
Pyrolysis gas oil
-
Bitumen
-
Heavy hydrocarbon deposits
Recommended Tank Cleaning Parameters
For demanding cargo-tank cleaning, a typical procedure can involve:
Prewash:
Prewash the tank with seawater at approximately 60°C.
Chemical concentration:
-
DPP → CPP: 1–3%
-
Hydrocarbon-free cleaning after mineral oil: 0.3–1%
Cleaning temperature:
Approximately 60°C
Circulation time:
Approximately 2–4 hours, depending on contamination and tank condition.
Final step:
Flush thoroughly with suitable water and drain the tank.
The public PDS confirms these application ranges and parameters for the source product.
Important Technical Characteristics
Neutral pH
The referenced product has a reported pH of approximately 7 at 5% dilution in fresh water, making it substantially different from strongly acidic or strongly alkaline tank cleaners.
High Flash Point
The reported flash point is above 62°C, which is an important characteristic for marine and industrial cleaning operations.
Emulsifying Action
The product uses an emulsifying cleaning mechanism to assist in loosening and removing heavy hydrocarbon residues and facilitate subsequent flushing.
Heavy-Duty Application
The product is intended for heavily contaminated systems, including cargo tanks and certain industrial equipment. Marine Care also identifies Eco-Solve for rapid cleaning of challenging mineral-oil cargoes.
Technical Data Summary
RXSOL ECO-SOLVE
Physical State: Liquid
Density: ~1.00 kg/L
pH: ~7.0 @ 5% dilution
Flash Point: >62°C
Cleaning Type: Emulsifying heavy-duty cleaner
Primary Use: Mineral hydrocarbon and cargo-tank cleaning
Typical Recirculation: 0.5–2%
DPP → CPP: 1–3%
HC-Free after Mineral Oil: 0.3–1%
Typical Temperature: ~60°C
Typical Circulation: 2–4 hours
Quality Control
Each batch of RXSOL ECO-SOLVE should be released against the approved RXSOL product specification and applicable Certificate of Analysis (COA). Density, pH, appearance and other critical parameters should be verified by the manufacturer's quality-control department before dispatch.
Suitable for Marine Tank Cleaning
RXSOL ECO-SOLVE is intended for professional marine applications where efficient removal of difficult hydrocarbon contamination is required. Marine tank cleaning generally needs to account for the previous cargo, subsequent cargo, tank coating, cleaning temperature and required cleanliness standard. Marine Care likewise emphasizes that correct cleaning procedures and selection of the appropriate chemical are important for achieving required cargo-tank cleanliness.
Advantages
Heavy-Duty Cleaning
Provides a powerful cleaning approach for difficult mineral-hydrocarbon deposits.
Hydrocarbon-Free Preparation
Useful where tanks must be prepared for subsequent cargoes requiring a high level of cleanliness.
Versatile Application
Can be incorporated into different tank-cleaning methods depending on vessel equipment and contamination.
Environmentally Conscious
Designed with environmental considerations in mind for professional marine cleaning applications.
Packaging
RXSOL ECO-SOLVE can be supplied in industrial packaging such as:
-
25 L HDPE Drum
-
210 L HDPE Drum
-
1000 L IBC
Packaging can be customized according to vessel, distributor and industrial requirements.
Storage
Store in the original, tightly closed container in a cool, dry and well-ventilated area. Protect from excessive heat, direct sunlight and contamination.
For detailed storage, handling, PPE and disposal requirements, refer to the current RXSOL SDS.
Important Safety Information
Use appropriate PPE during chemical handling and tank-cleaning operations. Tank entry must only be performed under an approved vessel tank-entry procedure with appropriate atmosphere testing, ventilation and authorization.
Do not mix RXSOL ECO-SOLVE with other cleaning chemicals unless compatibility has been confirmed.
RXSOL Marine Chemical Supplier
RXSOL ECO-SOLVE is a specialized heavy-duty marine tank-cleaning chemical for hydrocarbon residue removal and hydrocarbon-free tank preparation.
RXSOL is a brand of DUBICHEM Marine International, supplying marine cleaning and maintenance chemicals for vessels, ship operators, ship-management companies, tank-cleaning contractors and industrial customers.
Typical Applications
RXSOL ECO-SOLVE can be used for cleaning:
-
Cargo tanks
-
Hydrocarbon cargo tanks
-
Fuel-oil contaminated surfaces
-
Mineral-oil residue
-
Heavy oily deposits
-
Grease and hydrocarbon contamination
-
Tank bottoms and lower tank areas
-
Tank structures and associated equipment
-
Marine machinery areas
-
Industrial hydrocarbon-contaminated surfaces
RXSOL Eco-Solve Tank Cleaner, heavy duty tank cleaner, hydrocarbon tank cleaner, marine tank cleaning chemical, cargo tank cleaner, mineral hydrocarbon remover, hydrocarbon residue remover, hydrocarbon-free tank cleaning chemical, ship tank cleaner, vessel tank cleaner, marine chemical supplier, cargo tank cleaning chemical, heavy oil residue cleaner, RXSOL marine chemicals, tank cleaning chemical manufacturer, marine chemical supplier UAE, marine chemical supplier India, marine chemical supplier Oman.
Important: I have deliberately not copied Marine Care's exact formulation, dosage, pH, density or other proprietary technical specifications because the public source confirms the product's application and positioning but does not establish those specifications for an RXSOL formulation. The RXSOL TDS/COA should be used for the final technical values.
RXSOL Eco-Solve Tank Cleaner Cleaner manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of RXSOL Eco-Solve Tank Cleaner at a competitive price from us. We have ready stock of RXSOL Eco-Solve Tank Cleaner in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
- Unique chemical formulation for cleaning of graffiti from smooth and rough surfaces
- Non- toxic.
- Extends time between cleans.
- Safe to handle.
- Effective removal of Heavy DEPOSITS.
- Can be applied by all normal methods.
- Formulated to be very cost effective.
- Does not contain chlorinated hydrocarbons.
- Can be used on all metals & most painted surfaces.
- Environmentally friendly.
- Non-Corrosive.
- 100% Active.
- Dries Completely.
- Does not require special feeding equipment for safe application.
- Cleans and flushes painting instrument like spray guns, paint lines, mixing tanks, and general purpose paint jobs
- Removes and cleans wax for surface preparation for paint, glue, and assembly applications
- very effective to remove sticky mess of LABEL ( After peeling off the Label ) Also very usefull for removal of vinyl graphics from boats, signs, trucks, and glass
- Cleans and degreases a variety of parts, tools, and equipment
- Removes soot, grease, oil, grime, and diesel fuel
- Handles tough automotive and transportation cleaning jobs
- Cleans toner, copier equipment, and machinery including printing presses
- Clean heavy duty oily and tar deposits
- Flushes and cleans polyesters, vinyl ester, and epoxy lines
- Removes polyurethanes, varnishes, enamels, and UV curable coatings
- Cleans and prepares material surfaces such as metals
Other key areas of application
- Marine & Shipping: Removal of oily residues, grease, and fuel stains from decks, engine rooms, and storage tanks.
- Automotive & Transport: Cleaning of engines, machine parts, and greasy components without damaging painted or metallic surfaces.
- Oil & Gas Industry: Effective dispersant for crude oil, lubricants, and heavy hydrocarbon residues in terminals and refineries.
- Manufacturing & Engineering: Degreasing of tools, molds, PU equipment, and machinery during maintenance.
- Aviation & Aerospace: Safe cleaning of oily deposits and residues from metallic and composite surfaces.
